Cutting Edge Bloom 0-6-5™
Bloom 0-6-5™ is one of three components that create the complete Cutting Edge Solutions® 3-Part Base family. Bloom is used for the majority in the flowering stage of life, as well as small amounts in the vegetative stage.
Commercial and small sizes available: 1 Quart, 1 gallon, 2.5 gallon, 6 gallon, 15 gallon, 55 gallon barrel, and 270 gallon tote. *Please expect a 2-week lead time on placing commercial-sized orders.
Available Phosphate (P2O5) 6.0%
Soluble Potash (K20) 5.0%
Magnesium (Mg) 1.0%
Sulfur (S) 2.0%
2.0% Combined Sulfur
Derived from: Monopotassium Phosphate, Phosphoric Acid, Potassium Carbonate, and Potassium Sulfate.
Information regarding the contents and levels of metals in this product is available at:http://www.aapfco.org/metals.htm
For Drain to Waste / Soil Applications: check brochure / website mixing ratios
Micro 6-0-0™ Bloom 0-6-5™ Grow 2-1-6™
Clones & Seedlings (after roots) 5 ml/gal 5 ml/gal 10 ml/gal
Vegetative Stages (1 – 2 weeks) 8 ml/gal 5 ml/gal 15 – 20 ml/gal
Transition Stage (1 – 2 weeks) 8 ml/gal 15 ml/gal 5 ml/gal
Fruiting Stage (4 – 8 weeks) 8 ml/gal 15 – 20 ml/gal none
Flush Stage (5 – 10 days) 2.5 ml/gal 5 ml/gal none
|Teaspoon||Tablespoon||Fluid Ounce||Quart||US Gallon|
|5 ml||15 ml||30 ml||946 ml||
Bloom 0-6-5™ is a highly concentrated nutrient solution. Never mix undiluted fertilizer concentrates as this may result in nutrient lock-up. Add each nutrient separately to water and aerate reservoir regularly.
Shake well and measure carefully using a milliliter measuring cup. If using CES Micro 6-0-0™, add Micro 6-0-0™ first to water, then other nutrients.
After nutrients are mixed in water, adjust pH to 4.5-6.5.
Monitor ppm and EC in reservoir and top off with fresh water as needed.
Reservoir temperature should be 60-68 degrees F.
Do not store product in direct sunlight. Do not freeze.
Bloom 0-6-5™ is designed for use in hydroponics, soilless, continuous feed systems, drain to waste, and soil applications.